Katool KT-M120 12000 lbs Two Post Car Lift

Been in daily commercial use for over a year. The hydraulics are still tight, the locks engage crisp, the carriage travel is smooth, and the overhead shutoff still works exactly as designed. Built for production use and proving it every day.

The max lifting height of 70.75 inches gives proper working clearance for full exhaust system work on our taller trucks. Standing fully upright under a lifted dually is not something I took for granted before this lift. Makes a real difference in how long you can work comfortably.

We compared this against several competitors before buying and the KT-M120 won on capacity, design, and warranty in the same price range.

The low profile swing arms reach lift points on vehicles that would be awkward on a symmetric-only lift. We service some vehicles where precise arm positioning matters a lot and the KT-M120's arm geometry handles those situations without drama.

Katool's 12-month parts warranty with free replacement shipping gives solid backup on a major equipment purchase. We haven't needed it but the one time I called support with a setup question they answered the same day. Good manufacturer relationship.

The overhead shutoff, symmetric arms, dual hydraulic cylinders, and clear floor are each individually good features. The fact that they're all on one lift at this price point is what makes the KT-M120 genuinely impressive for what you're paying.

Our shop does a lot of truck suspension rebuilds and having a clear floor at 12,000 lb capacity makes those jobs accessible in a way that a 9k floor plate lift never could. The KT-M120 is the right spec for serious commercial truck service.

First lift I've ever owned and I was nervous about the install. Concrete spec check, anchor placement, and post alignment all went fine with one helper over a Saturday. The instructions are clear enough and online resources filled any gaps. Worth taking the full day to do it right.

The high-quality hydraulic system runs on either 110V or 220V which gave us flexibility when we were planning the install. We went 220V for the faster cycle time and the motor barely notices 12,000 lbs. Smooth, quick, and consistent on every lift.

We do a lot of exhaust and drivetrain work where the transmission jack needs to approach from multiple angles. The clear floor gives us that freedom completely. This lift removed the base plate obstacle that made rolling equipment positioning a constant compromise on our previous unit.

Drive-thru clearance at nearly 118 inches handles our widest vehicles without white-knuckling the drive-in. The symmetric arms position naturally on both sides and the manual two-side release makes lowering straightforward for one operator working solo.

The self-lubrication system on the column slides has kept the carriage travel smooth through 9 months of daily use without any manual greasing on my schedule.

Three-year structural warranty plus one-year parts is the right coverage structure for a lift. The steel gets warranted longest because that's the long-life component. Katool's warranty approach shows they understand how shop equipment actually ages.

The rubber pad door opening protection has already saved two vehicles from contact marks during arm positioning. When you're lifting multiple vehicles per day those small protections add up to zero damage complaints which is exactly what a customer-facing shop needs.

12,000 lbs handles our commercial van fleet without any concern. The manual safety release accessible from both sides means I can lower safely from whichever column I'm working near, no awkward reaching across the vehicle to the other post.

The feet-protection safety guardrails with the built-in tool box are a daily-use feature I didn't expect to appreciate as much as I do. My most-used tools are always right where I need them during undercar work. Small design detail that adds up over hundreds of lifts.

Concrete requirement is 5.9 inches minimum at 3,000 PSI, our slab was borderline so we had it tested before ordering. Came back at 6.1 inches and the anchors set perfectly. Worth verifying before you buy. The lift itself has been flawless since install.

The +30mm and +120mm extended support adapters come in the box which was a pleasant surprise. Our lifted trucks needed the extra reach immediately on day one and we didn't have to order anything additional. Good out-of-the-box completeness.

We upgraded from an 11k lift and the extra capacity headroom on the KT-M120 has changed how we approach heavy truck jobs. No more double-checking whether a loaded pickup is within limits. The S-column design gives the posts noticeably more rigidity under max load than the rectangular columns on our old unit.

The overhead safety shutoff bar has already done its job once when I lifted a van with a roof rack I forgot about. Stopped the lift before contact, no damage.

CE approved and tested at 115% dynamic and 150% static loading! When you're putting 11,500 lbs of truck in the air you want to know the lift has been independently pushed past its own rating. The KT-M120 delivers that confidence every time I raise a vehicle.

The clear-floor design on the KT-M120 was the main reason we went with this over a floor plate lift. With 12,000 lbs of capacity and nothing at ground level between the posts, rolling a transmission jack in from any angle is completely unobstructed. The dual hydraulic chain-drive cylinders keep both sides rising in perfect sync even under uneven loads. Been running it daily for 7 months without a single issue.