Triumph 7,000 lb Portable Two Post Auto Lift | C-7000

Triumph C7000 7,000 lb Portable Two-Post Auto Lift

The Triumph C7000 is a 7,000 lb portable two-post auto lift built for shops and home garages where ceiling clearance, floor space, or available electrical service rule out a permanent installation. It runs on standard 110V single-phase service, stands just 7' 11" overall — low enough for garages and basements that disqualify most commercial two-posts — and the post-to-post width is field-adjustable from 48" to 120" center-to-center, so the same lift services a Miata or an F-150 without remounting.

Why It's Different: The C7000's defining engineering choice is the absence of an overhead crossbeam and equalization cable. Conventional two-post lifts use a synchronization cable strung between the columns, which fixes the post spacing and locks the lift in place once installed. The C7000 replaces that cable with a fully independent column-and-cylinder pair, so a single operator can disassemble, store, or reposition the lift in under ten minutes. Recessed anchor pockets accept removable bolts, and the flush mounting system leaves a clean concrete surface when the lift is broken down — preserving 100% of the bay's usable floor space.

Best For: Shops with limited bays and hobbyists whose garage doubles as a workshop — anyone who needs full two-post service capability but can't commit a permanent footprint, lacks the ceiling height for an overhead lift, or wants to free the bay for storage, alignment work, or a second vehicle when the lift isn't in use.

⚠️ This lift ships LTL freight at 1,200 lb — liftgate delivery is NOT available. You'll need a forklift, Bobcat, tractor, tow truck, or backhoe to unload, or route the shipment to the carrier's nearest freight terminal for pickup with a trailer or moving van. Hardware ships separately via UPS.

⚠️ Electrical: the 3 HP power unit runs on 110V single-phase with a 30-amp breaker recommended. Confirm your circuit before ordering.

⚠️ Vehicle balance is critical on any two-post lift. The vehicle is supported by four arm pads on the frame, not by its wheels — reference your vehicle's lifting points, confirm the arms are seated on solid contact points, and engage the locks before working underneath.

⚠️ Concrete: verify your slab thickness and PSI rating against local code before ordering. Improper concrete can cause serious injury or death.

⚠️ Sold separately: column casters and rear-mounted post wheels are not included. Rubber lifting pads and cylinder seals are not covered under the parts warranty (beyond the first 30 days for seals).

Features

• 7,000 lb capacity — handles passenger cars, SUVs, and light trucks
• Portable design — disassembles and stores in under 10 minutes by one operator
• Cable-free operation — no overhead crossbeam or equalization cable; independent column-and-cylinder pair
• Field-adjustable width — 48" to 120" post-to-post (center-to-center)
• Low 95" (7' 11") overall height — fits low-ceiling garages and basements
• Welded automatic locking ladder — mechanical safety stops at multiple positions hold the load on steel, not hydraulic pressure
• Automatic arm restraints — engage as soon as the lift leaves the ground
• 69" maximum lifting height with 4.5" lowered arm clearance
• 3 HP power unit on standard 110V single-phase (30-amp breaker recommended)
• Wheeled dolly power unit — stages out of the way during use, rolls into storage
• Recessed removable anchors + flush mounting — preserves 100% usable floor space when stored
• Pad extensions included — 3" and 6" heights for trucks, vans, and SUVs above standard frame contact points
• 18" × 15" base plate footprint per column
• Backed by Triumph's 1-year parts warranty

Specifications

Column casters and rear-mounted post wheels sold separately. Verify concrete slab thickness and PSI rating against local code before ordering. Product manual available on request.