BE Power 2" Gas-Powered Semi-Trash Transfer Pump with Honda GX200 Engine

Dirty Water, No Problem.

When the job involves water you wouldn't dare run through a standard pump — water full of dirt, grit, leaves, sand, and small debris the BE Power 2" Gas-Powered Semi-Trash Transfer Pump with Honda GX200 Engine is built to handle it. Designed specifically for solids-laden water, the TP-2065HT can pass debris up to 5/8" in diameter without clogging, jamming, or damaging the pump making it the workhorse choice for contractors, farmers, municipal crews, and rental fleets who deal with muddy, gritty, or debris-filled water every day.

Powered by the legendary Honda GX200 commercial engine (196cc, 4-stroke OHV) known industry-wide for easy starts, fuel-efficient operation, and exceptional reliability the TP-2065HT moves up to 158 gallons per minute (GPM) with 33 PSI of discharge pressure and 85 ft total lift. The reinforced aluminum pump body is paired with a heavy-duty cast iron impeller sized and shaped to pass solids while still delivering strong flow. T-handles on the pump cover give you fast, toolless access to the pump body for clearing debris between jobs a feature that saves real time when the pump catches a stone or chunk of vegetation. The whole unit is wrapped in a heavy-duty steel roll cage that protects the machine on busy jobsites and provides ergonomic hand holds for two-person handling. As part of BE Power's Commercial Series, this pump is engineered for daily-use professional and rental-fleet applications.

Features

• Honda GX200 Commercial Engine (196cc, 4-Stroke OHV): Industry's most trusted small engine, easy starts, fuel-efficient operation, exceptional weight-to-power ratio, and a service network you can find anywhere. Designed for all-day, every-day use.
• Handles Solids Up to 5/8" Diameter: Pass dirt, grit, sand, small rocks, leaves, and other debris without clogging or damaging the pump. Built for the dirty work standard transfer pumps can't handle.
• Strong 158 GPM Flow Rate: High-volume movement even with solids-laden water, fast dewatering, fast cleanup, fast turnaround between jobs.
• 85 ft of Total Lift: 26 ft of suction lift plus 59 ft of discharge lift gives you the reach for excavations, ditches, basements, and elevated discharge points.
• Reinforced Aluminum Body + Cast Iron Impeller: Built tough for the rigors of trash-water pumping. The cast iron impeller stands up to grit, debris, and continuous abrasive use that would destroy lesser pumps.
• T-Handle Toolless Access: Twist the T-handles to open the pump body in seconds, no tools, no fumbling, no jobsite delays. Clear debris, inspect the impeller, and get back to work fast.
• Heavy-Duty Steel Roll Cage: Protects the engine and pump from jobsite drops, debris, and rough handling, and serves as built-in ergonomic carry handles for two-person lifting.
• Built-In Data Plate: Critical operating information clearly displayed on the unit so any operator can run it correctly.
• Commercial Series Build Quality: Engineered for the demands of professional, daily-use, and rental-fleet applications.
• Runs on Standard Pump Gas: Operates on 86 octane fuel (up to 10% ethanol), fill up anywhere.
  

Built for Dirty Water and Debris-Laden Pumping Jobs

The TP-2065HT is the go-to pump when the water just isn't clean:

• Construction site dewatering: pumping muddy water out of excavations, foundations, footings, and trenches where standard pumps would clog
• Flooded basement and crawl space cleanup: handling water that contains debris, dirt, leaves, and silt left behind by floods and storms
• Storm and flood response: dirty, debris-filled runoff cleanup after heavy rain, hurricanes, and seasonal flooding
• Pond, lake, and reservoir maintenance: moving water along with the dirt and small debris that accumulates at the bottom
• Agricultural ditch and field drainage: pumping water out of fields, irrigation ditches, and drainage points where mud and vegetation are present
• Septic-area and lagoon water transfer: handling effluent, lagoon water, and water with significant solid content (within the 5/8" solid size limit)
• Quarry, pit, and mining dewatering: pumping silt-laden and debris-filled water from active work sites
• Industrial wastewater and process water: transferring water with grit, scale, and small solids from manufacturing and processing facilities
• Pool and water feature deep cleaning: removing bottom water along with accumulated debris and sediment
• Rental fleet equipment: durable, dependable, and easy to service across hundreds of rental cycles where customers throw all kinds of dirty water at it

Specifications

What's in the Box

• BE TP-2065HT Semi-Trash Transfer Pump (Honda GX200) on Steel Roll Cage
• Operator's Manual