Triumph NTC-950-1 Tire Changer + NTB-800 Wheel Balancer Combo
This combo pairs a commercial-style tire changer with a home-garage wheel balancer for a complete, budget-friendly mount-and-balance station. The Triumph NTC-950-1 handles run-flat and low-profile tires with the help of a single assist arm, opens up to 28", and includes a Jet Blast inflator system and a powerful bead breaker. The NTB-800 balancer rounds out the set with two standout features — a wheel brake to hold the wheel steady while applying weights, and automatic data entry that needs only one input instead of three. Between the two, you can service just about any vehicle that drives up.
Why It's Different: This is the entry point into Triumph's tire-service combos — sized and priced for a personal home garage rather than a high-volume shop. The NTC-950-1's single assist arm still tames run-flats and low-profile tires, while the NTB-800's automatic data entry makes balancing approachable for someone who isn't doing it all day. Buy both together for a complete station at a bundle price.
Best For: Home garages, hobbyists, and light-use shops that want professional-grade tire service for passenger and light-truck wheels without stepping up to the higher-volume NTC-950-2 / NTB-1200 combo.
⚠️ Both machines require compressed air to operate — confirm your shop air supply before ordering. Both run on 110V.
⚠️ This is a passenger / light-truck home-garage combo. The NTC-950-1 handles tires up to 43" diameter and 15" wheel width, and the NTB-800 balances wheels up to 150 lb and 44" tire diameter — confirm your wheel sizes and weights are within rating. For truck-grade wheel weight (up to 350 lb), step up to the NTB-1200 combo.
⚠️ Bolt both machines to a level floor before use and always lower the balancer's safety hood before spinning a wheel. Install per the manufacturer's instructions.
⚠️ Tire equipment ships LTL with liftgate service included — the driver lowers the units to the ground at the back of the truck, but will not move them inside or assemble them. Two crates (820 lb + 300 lb).
Features
Assist Arm and Jet Blast for Run-Flats
The NTC-950-1's single pneumatic assist arm holds the bead down while you work, which is what makes run-flat and low-profile tires manageable without a second person. The Jet Blast inflator seats beads that won't seal on their own, and the bead breaker delivers 5,500 lbs of force — the same breaker fitted to the dual-arm NTC-950-2.
Single pneumatic assist arm
Jet Blast bead seating
5,500 lb bead breaker
One Input Instead of Three
Every balancer needs rim diameter, rim width, and distance. The NTB-800 captures two of them automatically when you touch the ruler to the wheel, leaving one to enter by hand. Paired with the wheel brake that holds the wheel still during weight placement, it makes balancing approachable for someone who isn't doing it all day — which is exactly the home-garage buyer this combo targets.
One manual input
Automatic distance and diameter
Foot-pedal wheel brake
Both Machines on 110V, Tooling Included
Neither machine needs commercial wiring. The changer clamps 14"–26" outside and 16"–28" inside for tires to 43" and 15" wide, and ships with metal and plastic demount heads, clamp covers, a tire iron, and a lube bucket. The balancer covers 10"–28" wheels to 150 lbs at ±1 gram in a 6 to 9 second cycle, with a safety hood, cone adapters, weight hammer, and rim caliper included.
Both on 110V
14–26 in out, 16–28 in inside
±1 gram, 6–9 sec cycle
Specifications
NTC-950-1 Tire Changer
| Specification |
Detail |
| Inside Clamping |
16" – 28" |
| Outside Clamping |
14" – 26" |
| Max Wheel Width |
15" |
| Max Tire Diameter |
43" |
| Bead Blast |
Yes (Jet Blast inflator) |
| Bead Breaker Force |
5,500 lbs |
| Horsepower |
1.5 HP |
| Max Inflation Pressure |
120 PSI |
| Voltage |
110 Volts (compressed air required) |
| Shipping Size |
51" × 38" × 51" |
| Shipping Weight |
820 lbs. |
NTB-800 Wheel Balancer
| Specification |
Detail |
| Wheel Size Range |
10" – 28" |
| Max Tire Diameter |
44" |
| Rim Width |
1.5" – 20" |
| Max Wheel Weight |
150 lbs. |
| Shaft Size |
36 mm |
| Automatic Data Entry |
Yes (enter one parameter, machine fills the other two) |
| Wheel Brake |
Yes |
| Display |
Standard or Metric |
| Accuracy |
±1 gram |
| Cycle Time |
6 – 9 seconds |
| Horsepower |
1/4 HP |
| Voltage |
110 Volts |
| Assembled Size |
28" × 48" × 62" |
| Shipping Size |
30" × 39" × 51" |
| Shipping Weight |
300 lbs. |
Combo warranty: Triumph tire equipment carries a 1-year parts warranty (no labor). Wear items excluded — on the tire changer: plastic protective pads/tooling on clamps, heads, bead breakers, assist arm, the tire-inflation hose, lube brush, and bucket; on the balancer: quick-release wing nut, hood cover, top tray cover, and wheel weight hammer.
What's Included
-
NTC-950-1 Tire Changer with single assist arm, Jet Blast inflator, and bead breaker
- Metal demount head
- Plastic demount head
- Plastic wheel clamp covers
- Tire iron
- Lube bucket and brush
-
NTB-800 Wheel Balancer with wheel brake and automatic data entry
- Plastic safety hood
- Quick-release wing nut
- Cone adapters
- Wheel weight hammer
- Rim caliper