Triumph NTC-950-2 Tire Changer + NTB-800 Wheel Balancer Combo
This combo pairs the dual-assist-arm NTC-950-2 tire changer with the auto-data-entry NTB-800 wheel balancer — every feature a high-volume shop needs without stepping up to truck-grade balancer cost. The NTC-950-2's dual pneumatic assist arms make even the toughest tires easy to change — wide-profile, low-profile, and run-flats — while bead-blast technology shoots a powerful blast of air into the sidewall to help break and seat stubborn beads. The NTB-800 adds two standout features: a foot-pedal wheel brake that holds the wheel steady while you place weights, and automatic data entry that needs only one input (wheel width) instead of three — an estimated 25% labor savings per balance.
Why It's Different: This combo gets you the pro-grade NTC-950-2 changer (with dual arms and bead blast) plus the fastest-to-operate balancer in the line. If your work is passenger and light-truck wheels and you don't need truck-grade 350 lb / 40 mm capacity, the NTB-800 actually saves time per balance compared to the truck-grade NTB-1200's manual data entry.
Best For: High-volume passenger and light-truck shops, performance shops, and serious home garages that want the dual-arm changer plus the fastest balancer setup — without paying for truck-grade balancer capacity they won't use.
⚠️ Both machines require compressed air to operate — confirm your shop air supply before ordering. Both run on 110V.
⚠️ This is a passenger / light-truck combo. The NTC-950-2 handles tires up to 43" diameter and 15" wheel width, and the NTB-800 balances wheels up to 150 lb and 44" tire diameter — confirm your wheel sizes and weights are within rating. For truck-grade wheel weight (up to 350 lb), step up to the NTC-950-2/NTB-1200 combo.
⚠️ Bolt both machines to a level floor before use and always lower the balancer's safety hood before spinning a wheel. Install per the manufacturer's instructions.
⚠️ Tire equipment ships LTL with liftgate service included — the driver lowers the units to the ground at the back of the truck, but will not move them inside or assemble them. Two crates (900 lb + 300 lb).
Features
Automatic Data Entry Cuts a Step From Every Balance
The NTB-800 needs only the wheel width entered by hand. Distance and diameter are captured automatically when the technician touches the distance ruler to the wheel, so three inputs become one. Over a full day of balancing that saves real time and removes a common source of error, since a mistyped diameter produces a wrong weight placement no matter how accurate the machine is.
Automatic distance and diameter
One manual input
Fewer entry errors
Dual Assist Arms for Run-Flat and Low-Profile Tires
The NTC-950-2's two pneumatic assist arms hold the bead down at two points while the technician mounts and demounts, which is what makes run-flats, low-profile, and wide-profile tires a routine job. Bead-blast technology shoots air into the sidewall to seat stubborn beads, the side-mounted bead breaker delivers 5,500 lbs of force, and the changer clamps 14"–26" outside and 16"–28" inside for tires up to 43" in diameter and 15" wide.
Two pneumatic assist arms
5,500 lb bead breaker
14–26 in out, 16–28 in inside
Both Machines on 110V, Tooling Included
The changer and the balancer both run on standard 110V. The changer comes with steel and plastic mount and demount heads, clamp covers, a soap tank and brush, and a tire bar. The balancer includes a safety hood, quick-release wing nut, cone adapters, a weight hammer, and a rim caliper, and balances to ±1 gram in a 6 to 9 second cycle.
Both on 110V
Changer and balancer tooling
±1 gram, 6–9 sec cycle
Specifications
NTC-950-2 Tire Changer
| Specification |
Detail |
| Inside Clamping |
16" – 28" |
| Outside Clamping |
14" – 26" |
| Max Wheel Width |
15" |
| Max Tire Diameter |
43" |
| Bead Blast |
Yes |
| Bead Breaker Force |
5,500 lbs |
| Horsepower |
1.5 HP |
| Max Inflation Pressure |
120 PSI |
| Voltage |
110 Volts (compressed air required) |
| Assembled Size |
56" × 93" × 80" |
| Shipping Size |
38" × 65" × 51" |
| Shipping Weight |
900 lbs. |
NTB-800 Wheel Balancer
| Specification |
Detail |
| Wheel Size Range |
10" – 28" |
| Max Tire Diameter |
44" |
| Rim Width |
1.5" – 20" |
| Max Wheel Weight |
150 lbs. |
| Shaft Size |
36 mm |
| Automatic Data Entry |
Yes (enter width only; distance + diameter automatic) |
| Wheel Brake |
Foot pedal |
| Display |
Standard or Metric |
| Accuracy |
±1 gram |
| Cycle Time |
6 – 9 seconds |
| Horsepower |
1/4 HP |
| Voltage |
110 Volts |
| Assembled Size |
28" × 48" × 62" |
| Shipping Size |
30" × 39" × 51" |
| Shipping Weight |
300 lbs. |
Combo warranty: Triumph tire equipment carries a 1-year parts warranty (no labor). Wear items excluded — on the tire changer: plastic protective pads/tooling on clamps, heads, bead breakers, assist arms, the tire-inflation hose, lube brush, and bucket; on the balancer: quick-release wing nut, hood cover, top tray cover, and wheel weight hammer.
What's Included
-
NTC-950-2 Tire Changer with dual pneumatic assist arms and bead-blast
- Steel mount and demount head
- Plastic mount and demount head
- Plastic wheel clamp covers
- Soap tank and application brush
- Tire tool bar
-
NTB-800 Wheel Balancer with foot-pedal brake and automatic data entry
- Plastic safety hood
- Quick-release wing nut
- Cone adapters
- Wheel weight hammer
- Rim caliper